- This topic has 2 replies, 2 voices, and was last updated 9 years, 5 months ago by
.
-
Posts
-
Hello there,
I have a large home that has a total of 4 HVAC units and I only notice room enough for 3 in Optimiser. I need to make sure I model all 4, as they have all been sealed and qualify for the duct seal rebate.
Thank you,
Christine
Hi Christine,
I’m working with some of the APS/SRP program administrators to determine the preferred method for handling this. I will get back to you soon.
Here is another post describing how to appropriately model more that 3 HVAC systems: https://optimiserenergy.com/forums/topic/number-of-hvac-systems/
Once you have modeled the systems as described in that post, you can get a fourth duct sealing job to register by following these steps.
1. Go to one of the cooling systems interfaces
2. Setting the Shared control to Separate
3. Set the remainder of the Distribution controls identically system to which it was previously linked.
- You must be logged in to reply to this topic.