- This topic has 1 reply, 2 voices, and was last updated 10 years, 3 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Posting this on behalf of people posing questions to the Support Desk.
For inaccessible attics, should they be characterized as “Attic” or “Ceiling” or both?
For the purposes of modelling in OptiMiser, an Attic is any ceiling for which the ceiling framing is separate from the roof framing and there is an enclosed, unconditioned buffer space between the ceiling and roof surfaces. An inaccessible attic would still be modeled in the Attic section.
Under no circumstance would you model the same area in both Attic and Ceiling.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.