- This topic has 1 reply, 2 voices, and was last updated 11 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
EDIT: Wood is now available as a Fuel selection for the heating systems.
The cooling system can be specified normally. Selecting a heat pump in the Cooling System control does not automatically apply the heat pump to the heating load. You have to specify it in the Heating System control to make that happen.
This post covers how to model wood heat: https://optimiserenergy.com/forums/topic/how-do-i-model-a-ducted-wood-burning-furnace
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.