- This topic has 1 reply, 2 voices, and was last updated 9 years, 3 months ago by
.
-
Posts
-
My reports are very lengthy with lots of pages due to wasted space on the “issues” portion of the report. Is there any way to add more than just one or two issues per page?
At this point there are no more than 2 issue rows per additional report page. You could fit 4 separate issues on a single additional report page by grouping issues into categories and listing them together on a single issue row. Say you have 5 issues, A-E, but B and C are related and D and E are related. On the first page, you would have the improvement table followed by a summary paragraph followed by the first issue row where issue A would be found with pictures and a description. Instead of having the remaining 4 issues take up two additional pages, you could fit them all into one additional page by having the first issue title address both issue B and C, with a pictures for issue B and C in the first issue row of the additional page with two short separate descriptions (you can separate the issue descriptions with a hard return) in the first issue rows issue description. Then the second issue row of the first additional report page would have an issue title addressing issue D and E with pictures and descriptions for both issue D and E (again, with the issue description separated with a hard return if necessary). Of coarse, this workaround to get 4 issues on one additional report page is dependent on the length of each issues description and whether the descriptions of the two issues can be integrated into one consolidated issue description.
Other than what I just described, the actual spacing of the rows and content on the additional pages is locked down and un-editable.
- You must be logged in to reply to this topic.